Les marteaux hydrauliques n’ont pas de secret pour nous !

Nos services

Réparation

Produits

Fabrication

Spécifications

Marteau hydraulique

  • Advencad technology
  • TOPA Series

Machoire Hydraulique

  • Shear series 
  • Pulverizer series 
  • Demolition series 
  • Multi processor 
  • Crusher series 
  • Stone Grapple

Compacteur hydraulique

  • Compacteur ( sur la page Crusher series)

Marteau hydraulique

PRODUCTS RANGES

TOPA series
Description Unit TOPA 70 TOPA 100 TOPA 200 TOPA 300 TOPA 500 TOPA 900
Operating Weight kg 94 174 246 344 547 969
Overall Length mm 924 1077 1198 1411 1659 1990
Operating Oil pressure kg/cm³
bar
80∼120
81∼122
90∼120
91∼122
120∼160
122∼163
120∼160
122∼163
130∼170
132∼173
150∼170
152∼173
Oil Flow ℓ/min 14∼30 20∼40 30∼60 35∼70 40∼85 80∼110
Blow bpm 650∼1200 500∼1200 500∼1000 450∼800 450∼750 450∼750
Chisel
Length
mm
mm
45
40
56
590
65
700
70
700
85
850
99
1000
Impact Energy J
ft•lb
167
123
257
190
645
476
836
617
1234
910
2206
1627
Applicable Exacavator
ton
0.01∼0.06
0.5∼2.5
0.07∼0.15
2.5∼3.5
0.15∼0.25
3.0∼4.5
0.25∼0.55
4.0∼6.5
0.35∼0.45
6∼9
0.45∼0.65
10∼17
TOPA "N" series
Description Unit TOPA 1400N TOPA 1600N TOPA 2000N TOPA 3000N TOPA 4000N
Operating Weight kg 1375 1651 2319 2410 3423
Overall Length mm 2096 2179 2452 2658 3033
Operating Oil pressure kg/cm³
bar
150∼180
152∼183
150∼180
152∼183
150∼180
152∼183
160∼190
163∼183
160∼110
163∼183
Oil Flow ℓ/min 110∼150 110∼150 150∼190 170∼250 210∼290
Blow bpm 360∼480 360∼480 340∼460 320∼450 230∼320
Chisel
Length
mm
mm
132
1150
142
1250
152
1400
157
1450
175
1500
Impact Energy J
ft•lb
3204
2363
3918
2890
5321
3924
6435
4746
10900
8039
Applicable Exacavator
ton
0.7∼0.9
18∼22
0.8∼1.0
22∼26
1.0∼1.2
26∼30
1.2∼1.5
28∼40
1.5∼2.0
35∼50

Accumulator applied
Adjust Vavle applied

Machoire Hydraulique

SHEAR series

  • Round blade allows to reduce the cutting resistance by spreading cutting points
  • The life of the abrasion parts are extended by using special steel
  • Disortion of body is being prevented by using special PIN
  • Motor Rotating type / Free Rotating type
  • Specification
Description Unit ONE CYLINDER
TPMS 1600 TPMS 3000 TPMS 4000
Operating Weight kg 2000 2450 3400
Overall Length mm 1995 2174 2760
Opening Width mm 510 580 710
Middle Cutting Force ton 195 270 280
Operating Oil Pressure kg/cm³ 300 320 320
Motor Setting Pressure kg/cm³ 160 160 160
Carrier Weight ton 18∼26 26∼32 32∼36
Description Unit TWO CYLINDER
TPMS 1630Ⅱ TPMS 3030Ⅱ TPMS 1400Ⅱ TPMS 1600Ⅱ TPMS 3000Ⅱ TPMS 4000Ⅱ
PIN TYPE   ONE POINT TWO POINT
Operating Weight kg 1760 3292 1100 1760 2800 5700
Overall Length mm 2072 2760 1835 2075 2435 3250
Opening Width mm 520 600 490 520 600 716
Middle Cutting Force ton 127 205 88 127 197 631
Operating Oil Pressure kg/cm³ 300 320 280 300 320 280∼360
Motor Setting Pressure kg/cm³ 160 160 160 160 160 160
Carrier Weight ton 18∼26 26∼32 13∼17 18∼26 26∼32 45∼60

PULVERIZER series

  • Optimized high safety and excellent demolition power
  • Excellent operation efficeincy by simple and easy Jaw exchange
  • Higher capacity comparing with equal grade of machine
  • Motor Rotating type / Free Rotating type
  • Specification
Description Unit ONE CYLINDER FIXED TYPE
TPMP 1400 TPMP 1600 TPMP 3000 TMP 700 TMP 800 TMP 1000 TMP 1200
Operating Weight kg 1600 2000 2600 1250 1800 2350 2850
Overall Length mm 2035 2390 2630 1580 1806 1990 2336
Opening Width mm 800 900 1000 800 980 1100 1300
Middle Cutting Force ton 75 100 135 70 120 195 270
Operating Oil pressure kg/cm³ 250 300 320 280 300 320 320
Motor Setting Pressure kg/cm³ 160 160 160        
Carrier Weight ton 14∼20 18∼26 26∼32 14∼20 18∼26 26∼32 38∼48
Description Unit TWO CYLINDER
TPMP1630Ⅱ TPMP 3030Ⅱ TPMP 1400Ⅱ TPMP 1600Ⅱ TPMP 3000Ⅱ
PIN TYPE   ONE POINT TWO POINT
Operating Weight kg 1800 2900 1100 1760 2800
Overall Length mm 2025 2745 1795 2020 2430
Opening Width mm 900 1000 770 900 1000
Middle Cutting Force ton 108 175 85 108 175
Operating Oil Pressure kg/cm³ 300 320 280 300 320
Motor Setting Pressure kg/cm³ 160 160 160 160 160
Carrier Weight ton 18∼26 30∼40 13∼17 18∼26 26∼32

DEMOLITION series

  • Applied same technology of shear for higher performance, capacity and technical advantage
  • Tooth at front part has been applied for demolition and grabbing function
  • Structure has been optimized to suit for high density of steel works in the demolition objects
  • Excellent operation efficiency by simple and easy Jaw exchange
  • Design has been optimized to suit for transportation and demolition at the front edge of tooth
  • Hydraulic Motor Rotating type
  • Specification
Description Unit ONE CYLINDER
TPMD 900 TPMD 1400 TPMD 1600 TPMD 3000
Operating Weight kg 1000 1600 2000 2450
Overall Length  mm 1730 1935 2140 2180
Opening Width mm 530 610 650 740
Middle Cutting Force ton 80 140 190 280
Operating Oil pressure kg/cm³ 230 250 300 320
Motor Setting Pressure kg/cm³ 150 150 160 160
Carrier Weight ton 14∼20 16∼22 18∼26 26∼32
Description Unit TWO CYLINDER
TPMD 1630Ⅱ TPMD 3030Ⅱ TPMD 1600Ⅱ TPMD 3000Ⅱ
PIN TYPE   ONE POINT TWO POINT
Operating Weight kg 1760 2900 1760 2800
Overall Length mm 1960 2745 1960 2430
Opening Width  mm 900 1000 900 1000
Middle Cutting Force ton 127 205 130 200
Operating Oil pressure kg/cm³ 300 320 300 320
Motor Setting Pressure kg/cm³ 160 160 160 160
Carrier Weight ton 18∼26 30∼40 18∼26 26∼32

 

MULTI PROCESSOR

  • Multifunctional attachement applying all sort of specialized technologies of Dong Myung TOPA
  • For muti-functional operation, various Jaw can be changed on one main body according to nature of work
  • Motor Rotating type
  • Specification
Description Unit ONE CYLINDER
TPMS 1630 TPMS 3030 TPMP 1630 TPMP 3030 TPMD 1630 TPMD 3030
JAW TYPE   SHEARING PULVERIZING DEMOLISHING
Operating Weight kg 2100 2600 2150 2800 2000 2700
Overall Length mm 2150 2250 2240 2380 2135 2240
Opening Width mm 520 610 900 1000 650 740
Middle Cutting Force ton 110 145 100 125 117 165
Operating Oil Pressure kg/cm³ 300 320 300 320 300 320
Motor Setting Pressure kg/cm³ 160 160 160 160 160 160
Carrier Weight ton 18∼26 26∼32 18∼26 26∼32 18∼26 26∼32

 

CRUSHER series

  • Excellent crushing power
  • HARDBOX steel used for part of main body and Jaw, so that longer life time applied
  • Operating efficiency has been upgraded by simple Jaw change for steel cutter and demolition
  • Two pin, Hydraulic Motor Rotating type
  • Specification
Description Unit TWO CYLINDER
TPMC 1600Ⅱ TPMC 3000Ⅱ TPMC 4000Ⅱ
Operating Weight kg 1680 2630 6100
Overall Length mm 1945 2420 3395
Opening Width mm 950 1100 1570
Middle Cutting Force ton 110 175 283
Operating Oil pressure kg/cm³ 300 320 350
Carrier Weight ton 18∼26 26∼32 45∼52

 

COMPACTOR

Description Unit CP 10 CP 30 CP 60 CP 80 CP 100
Tramping Power kgf 1500 2500 6000 9000 11000
Max. Vibration rpm 2400 2400 2400 2400 2400
Oil Flow Rate ℓ/min 40 60 120 151 165
Operating Oil pressure kg/cm³ 80∼120 100∼130 110∼160 130∼180 150∼210
Operating Weight kg 168 308 692 986 1171
Tramping Area mm 558X502 850X460 990X760 1300X850 1484X950
Carrier Weight ton 1∼2 3∼7 8∼17 18∼28 28∼35

High effective in hardening of the simple road works

  • High quality of pressure motor is applied to all of compactor
  • All in one block oil flow control valve
  • High effective in hardening at narrow ditch

STONE GRAPPLE

Rotating stone grapple provides driving comfort with powerful hydraulic pressure, excellent working speed and convenience.

  • The safety check valve in cylinder prevents the grabbed material falling down
  • Excellent abrasion resistance and high gradient prolong its life
  • Carring rocks and excellent performance in loading
  • High durability and hardness with reliable material HARDOX, cost cut and long life with light weight 
Description Unit XDB 20 XDB 100 XDB 180
Operating Weight kg 270 1150 1580
Overall Length mm 854 1356 1410
Overall Width mm 1051 1880 2113
Max. Opening Width mm 1033 1848 2075
ARM Width mm 450 800 1200
Crushing Force ton 2 5.8 8.6
Operating Oil Pressure kg/cm³ 200 300 300
Oil Flow Rate ℓ/min 20 40 40
Motor Setting Pressure kg/cm³ 160 160 160
Carrier Weight ton 3∼5 15∼20 25∼35

 

QUICK COUPLER

Description Unit TL 30 TL 60 TL 80 TL 100
Length mm 270 390 460 475
Width mm 242 352 456 534
Height mm 186 230 270 300
Operating Weight kg 55 120 220 410
Oil Flow Rate ℓ/min 10 10 15 15
Operating Oil pressure kg/cm³ 40∼280 40∼280 40∼280 40∼280
Applicable Length mm 269∼274 385∼390 459∼464 471∼477
Carrier Weight ton 3∼6 7∼13 17∼22 25∼33
  • One body 3D structure has been applied for longer life of shank and for protection of structure
  • Changeable tooth has been used for excavator bucket to increase supply advantage
  • 3-steps safety protection
  • Easy and simple mounting system

Compacteur hydraulique

CRUSER series

  • Excellent crushing power
  • HARDOX steel used for part of main body and Jaw, so longer life time applied
  • Operating efficiency has been upgraded by simple Jaw change for steel cutter and demolition
  • Two pin, Hydraulic Motor Rotating type
  • Specification
Description Unit TWO CYLINDER
TPMC 1600Ⅱ TPMC 3000Ⅱ TPMC 4000Ⅱ
Operating Weight kg 1680 2630 6100
Overall Length mm 1945 2420 3395
Opening Width mm 950 1100 1570
Middle Cutting Force ton 110 175 283
Operating Oil pressure kg/cm³ 300 320 350
Carrier Weight ton 18∼26 26∼32 45∼52

COMPACTOR

Description Unit CP 10 CP 30 CP 60 CP 80 CP 100
Tramping Power kgf 1500 2500 6000 9000 11000
Max. Vibration rpm 2400 2400 2400 2400 2400
Oil Flow Rate ℓ/min 40 60 120 151 165
Operating Oil pressure kg/cm³ 80∼120 100∼130 110∼160 130∼180 150∼210
Operating Weight kg 168 308 692 986 1171
Tramping Area mm 558X502 850X460 990X760 1300X850 1484X950
Carrier Weight ton 1∼2 3∼7 8∼17 18∼28 28∼35

High effective in hardening of the simple road works

  • High quality of pressure motor is applied to all of compactor
  • All in one block oil flow control valve
  • High effective in hardening at narrow ditch

7940b Avenue Marco-Polo - Montréal, QC H1E 2S5

Tél. : (514) 648-6667

7940b Avenue Marco-Polo - Montréal, QC H1E 2S5

Tél. : (514) 648-6667